13 Communications Gateway User Guide
X
Home Print E xit
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary License
Cabling and Startup for a Single User
Allow 5 to 30 minutes to power up the first time because the Motorola Communications
Gateway must find and lock on the appropriate channels for communications.
1Be sure your computer is on and the Communicatio ns Gateway is unplugged.
2Connect one end of the coaxial cable to the cable outlet or splitter.
3Connect the other end of the coaxial cable to the Coax connector on the
Communications Gateway.
4Hand-tighten the connectors to avoid damaging them.
5Insert the Motorola Communications Gateway CD-ROM into your CD-ROM drive.
Coax connector
To cable outlet
or splitter