Motorola Communications Gateway manual Setting Up a USB Driver in Windows 98 SE

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Setting Up a USB Driver in Windows 98 SE

Be sure the Motorola Communications Gateway CD-ROM is inserted in your CD-ROM drive before you plug in the USB cable. This CD contains the USB drivers and must be inserted and read by the PC before you connect the Communications Gateway to the PC.

A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed.

1Click Next.

2Be sure “Search for the best driver for your device” is selected as in the window at bottom left.

3Click Next.

Home	Print	X	22	Communications Gateway User Guide
		Exit