Motorola Communications Gateway manual Replacing the Battery

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

3

2

1 1

Replacing the Battery

When the battery light on the Top and Front Panel does any of the following, replace the battery:

■Flashes yellow — the battery is low

■Flashes red — the battery has failed

■Lights solid red — the battery is missing

Caution

Replacing the battery with an incorrect type can cause an explosion. Use a CSB GP 1222 F2 12V 2.2 Ah battery only. For information about obtaining a spare battery, contact your service provider.

To replace the battery:

1Unplug the power cord from the AC wall outlet to turn off AC power.

2On the Battery Compartment cover, push in on the tabs, as shown by arrows 1 at left.

3Carefully remove the battery compartment cover by lifting up about 2 to 3 cm (1 inch) and then pulling straight out. To avoid damaging the cover, be sure you rotate it only slightly (arrow 2) before pulling it out (arrow 3).

Home	Print	X	45	Communications Gateway User Guide
		Exit