Motorola Communications Gateway

14 Communications Gateway User Guide

Cabling and Startup for a Single User, continued

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Home Print E xit

6On the battery compartment cover, push in on the tabs, as shown by arrows 1 in the

illustration at top left.

7Carefully remove the battery compartment cover by lifting up about 2to 3 cm (1 inch)

and then pulling straight out. To avoid damagi ng the cover, be sure you rotate it only

slightly (arrow 2) before pulling it out (arrow 3).

For a description of the battery compartment, see “Battery Compartment” on page 6.

8As shown at lower left, depress both battery snaps (arrows 1) while gently raising the

positive end of the battery (arrow 2).

9When the battery rotates past the snaps, slide the battery out as shown below.

Be sure you do not damage the battery wires or terminals.

Battery snaps

Battery hook