Motorola Communications Gateway manual Configuring TCP/IP in Windows 95, 98, or Me

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Configuring TCP/IP in Windows 95, 98, or Me

The following instructions are for Windows 95, 98 and Me. For Windows 2000 or XP, see “Configuring TCP/IP in Windows 2000 or XP” on page 36. For a Macintosh or UNIX system, refer to your user guide.

1On the Windows Desktop, click Start.

2Select Settings and then Control Panel from the pop-up menus.

3Double-click the Network icon on the Control Panel window.

4Select the Configuration tab on the Network window.

5If TCP/IP is displayed in the list of network components, it is installed and you can skip to step 10. If TCP/IP is not displayed on the list, continue with step 6.

Although your Motorola Communications Gateway model number may be different than in the images in this guide, the procedure is the same.

Home	Print	X	33	Communications Gateway User Guide
		Exit