35 Communications Gateway User Guide
Configuring TCP/IP in Windows 95, 98, or Me, continued
Introduction Before You Begin Installation & Configuration FAQ
Troubleshooting
Glossary License
X
Home Print E xit
10 Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose
the one for the Ethernet card or USB port connected to the Communications
Gateway.
11 Click Properties. The TCP/IP window is displayed.
12 Click the IP Address tab.
13 Click Obtain an IP address automatically.
14 Click OK to accept the TCP/IP settings.
15 Click OK to close the Network window.
16 Click OK when prompted to restart your computer and click OK again.
When you complete TCP/IP configuration, go to “Verifying the IP Address in
Windows 95, 98, or Me” on page 40.