Motorola VM9 manual Adjusting the Phone’s Volume Settings, Alert Notification

Models: VM9

1 250
Download 250 pages 32.42 Kb
Page 67
Image 67

Adjusting the Phone’s Volume Settings

You can adjust your phone’s volume settings to suit your needs and your environment.

To adjust your phone’s volume settings:

1.Press S> Settings > Sounds > Volume.

2.Select Ringer, Messaging, Alarm, or Key Beep, and then follow the prompts to choose volume settings.

— or —

Select Advanced > Applications, Calendar, Connected Call, Power On or Speaker Phone, and then follow the prompts to choose volume settings.

3.Follow the prompts to choose a volume level and press Done (left softkey).

Tip:

In standby mode, you can adjust the ringer volume by using

 

the volume keys on the side of your phone.

 

To reset your volume setting to factory defaults,

 

 

press S> Settings > Sounds > Volume > Reset Volumes.

 

 

 

Your Phone’s Settings

Alert Notification

Your phone can alert you with an audible tone when you change service areas, once a minute during a voice call, when a call has been lost, when you connect to the network, or when you received a new messages.

To enable or disable alert sounds:

1.Press S> Settings > Sounds > Alerts.

2.Highlight Service, Minute Beep, Call Lost, Connect, or New Message and press S.

3.Select On or Off and press S.

Section 2B: Controlling Your Phone’s Settings

49

Page 67
Image 67
Motorola VM9 manual Adjusting the Phone’s Volume Settings, Alert Notification, To adjust your phone’s volume settings