Chapter 2 Installing LabVIEW SignalExpress
Getting Started with LabVIEW SignalExpress 2-2 ni.com
Installing LabVIEW SignalExpressComplete the following steps to install LabVIEW SignalExpress on
Windows Vista/XP/2000/NT.
Note If you want to convert LabVIEW SignalExpress projects to LabVIEW block
diagrams, you must install LabVIEW 7.1 or later before you install LabVIEW
SignalExpress.
1. Disable any automatic virus detection programs before you install.
Some virus detection programs interfere with the installation program.
2. Log on as an administrator or as a user with administrator privileges.
3. Insert the LabVIEW SignalExpress Development or Evaluation CD
and follow the instructions that appear on the screen.
By default, LabVIEW SignalExpress installs in the Program Files\
National Instruments\SignalExpress directory.
4. After installation, check the hard disk for viruses and enable any virus
detection programs you disabled.
The example projects you use with this manual are located in
SignalExpress\Examples\Tutorial. The solutions for each exercise
are located in SignalExpress\Examples\Tutorial\Solutions.
If you use LabVIEW SignalExpress with National Instruments data
acquisition or modular instrumentation hardware, you must install
NI-DAQmx 8.5 or later, NI-SCOPE 2.7 or later, NI-FGEN 2.2 or later, or
NI-DMM 2.4.2. LabVIEW SignalExpress includes a National Instruments
Driver CD that includes these drivers.