National Instruments 373873C-01

Chapter 5 Logging Data

Figure 5-5. Playback Options View

2. Select signal from the second log you created in the Logged signal

listbox.

3. Enter 1 in the Start time control to play back or analyze a subset of the

logged signal beginning 1 second after the start of the log.

4. Enter 4 in the Stop time control to play back or analyze a subset of the

logged signal ending four seconds after the start of the log.

5. Switch to the Data View and drag the filtered data output of the Filter

step into the Data View.

6. Click the Run button, shown at left. LabVIEW SignalExpress filters

the subset of the signal you specified in the Playback Options View and

displays the resulting filtered signal in the Data View.

7. Click the Stop button to stop running the project.

Refer to the LabVIEW SignalExpress Help for more information about

logging data, such as specifying alarm conditions and playback options.