Chapter 7 Extending LabVIEW SignalExpress Projects with LabVIEW
© National Instruments Corporation 7-3 Getting Started with LabVIEW SignalExpress
Figure 7-1. Limiter VI Step Setup Dialog Box
4. Click the Run button, shown at left, to run the project.
5. Drag the Clipped waveform out output signal from the Limiter.vi step
to the Data View.
6. Double-click the Limi ter.vi step to display the Step Setup dialog box.
7. Select the Configure VI tab to display the VI.
8. Enter new values in the Upper limit and Lower limit fields. F or
example, enter 100 in the Upper limit field.
9. Click the Apply button to apply the changes.
10. Click the Close button to close the VI and click the Close button to
close the Step Setup dialog box.
The Clipped waveform out signal changes on the Data View to reflect
the changes you made.
Refer to the LabVIEW SignalExpress Help for more information about
using LabVIEW VIs in LabVIEW SignalExpress and building VIs that
work well in LabVIEW SignalExpress.