Chapter 3 Working with Projects
© National Instruments Corporation 3-7 Getting Started with LabVIEW SignalExpress
6. Click the Input/Output tab to display the list of possible inputs and
outputs for this step, as shown in Figure 3-4.
Figure 3-4. Amplitude and Levels Step Setup Dialog Box
7. Place checkmarks in the Export +peak value, Export -peak value,
and Export peak-peak value checkboxes to configure the Amplitude
and Levels step to return three additional measurements.
Three additional outputs appear in the Project View.
8. Click the Data View tab to display the Data View.
9. Drag the three new outputs from the Project View to the table to
display the scalar measurements.
10. Click the Stop button, shown at left, to stop the project.
When you click the Stop button, the project stops running after
completing the current cycle of operations, or the current iteration.
Click the down arrow on the Stop button and click the Abort button to
completely stop the project without finishing the current iteration.