Chapter 5 Logging Data
Getting Started with LabVIEW SignalExpress 5-4 ni.com
2. Select Signal Selection in the Category list in the Recording Options
View.
3. Place a checkmark next to the signal in the Record column, as shown
in Figure 5-3.
Figure 5-3. Signal Selection
The Record button changes to the Record While Running button,
shown at left. Ensure the Record While Running button is pressed.
When the Record While Running button is pressed, LabVIEW
SignalExpress records the selected signal when you click the Run or
Run Once button.
4. Select Start Conditions in the Category list in the Recording Options
View.
5. Click the Add bu tton in the Logging start conditions page to
customize a start condition for your logging task.
a. Select the Signal option in the Condition source control to
specify for LabVIEW SignalExpress to begin recording when the
input signal meets the specified condition.
b. Select signal in the Signal control.