National Instruments 373873C-01 Installing LabVIEW

Installing LabVIEW

SignalExpress

You can use the LabVIEW SignalExpress CD to install LabVIEW

SignalExpress and complete the exercises in this manual.

LabVIEW SignalExpress LE

LabVIEW SignalExpress LE gives you a 30-day trial of the Full version of

LabVIEW SignalExpress. After that period, you must activate your version

of LabVIEW SignalExpress LE or purchase the Full version. If you activate

your version of LabVIEW SignalExpress LE before your 30-day trial of the

full version is complete, the full features are still available for the remainder

of your 30-day trial. You can use LabVIEW SignalExpress LE to complete

simple data acquisition and logging functions.

If you do not register your version of LabVIEW SignalExpress LE after

30 days, LabVIEW SignalExpress LE runs with the following limitations:

• You can no longer save projects, so you cannot convert projects into

LabVIEW block diagrams.

• You can run projects for only 10 minutes per session.

Refer to the National Instruments Web site at ni.com/signalexpress to

purchase the full version of LabVIEW SignalExpress.

LabVIEW SignalExpress requires a minimum of 256 MB of RAM and a

Pentium III or later or Celeron 866 MHz or equivalent processor, but

National Instruments recommends 512 MB of RAM and a Pentium 4/M or

equivalent processor.