NEC N8103-89 manual Installing Additional HDD Cage, Connecting I2C Cable

65

5-5. Installing Additional HDD Cage

To install an additional HDD cage in the server, see the procedure described in the User’s Guide coming with the additional HDD cage.

5-6. Connecting I2C Cable

To use the additional HDD cage, connect the card to the cage through the I2C cable coming with the card. Connect the 3-pin connector (white) of the I2C cable to the I2C connector on the card and the 4-pin connector (black) to the additional HDD cage. For the mating connector on the additional HDD card, refer to the User’s Guide of the additional HDD cage.

Without use of the additional HDD cage, the I2C cable may not be connected.

I2C connector

3-pin connector (white)

To additional HDD cage

4-pin connector (black)

I2C cable

The N8154-01F S-ATA HDD Cage also contains an I2C cable in its package. However, it is unavailable for the card. Always use the I2C cable coming with the card.

Notice