NEC xen mail cti - page 26

June 2004 NEC Business Solutions Ltd

20 - Chapter 2 Setting Up the System

Doc. No. 8557 - Release 1.1

June 2004

5 If you selected IPX/SPX, perform the appropriate action below.

Otherwise, go to step 5.

• To select “Version 3.x or 4.x bindery mode,” type1 and press ENTER.

• To select “Version 4.x directory service,” type 2 and press ENTER.

To set up the voice messaging system software, continued

1 If you selected “Version 3.x or 4.x bindery mode,” perform the following

actions. Otherwise, go to step 2.

• Type m and press ENTER. Type the correct value for the “NetWare name

context” field and press ENTER.

• Confirm your entry is correct. Press ENTER to continue.

2 If you selected “Version 4.x directory service,” perform the following

actions:

• Type m and press ENTER. Type the correct value for the “NetWare name

context” field and press ENTER.

• Confirm your entry is correct. Press ENTER to continue.

• Type m and press ENTER. Type the correct value for the “Preferred NetWare

server name” field and press ENTER.

• Confirm your entry is correct. Press ENTER to continue.

3 From the Ethernet Frame Header menu, perform the appropriate action

below:

• To select “Ethernet 802.2,” type1 and press ENTER.

• To select “Ethernet 802.3,” type2 and press ENTER.

• To select “Ethernet Snap,” type3 and press ENTER.

• To select “Ethernet II,” type4 and press ENTER.

4 When you have completed your selection, press ENTER to continue.

5 If you selected NetBIOS over TCP/IP, perform the following actions.

Otherwise, go to step 1.

• Type 1 and press ENTER. Type the correct value for the “Workstation name”

field and press ENTER.

• Type 2 and press ENTER. Type the correct value for the “NT Domain name”

field and press ENTER.

• Type 3 and press ENTER. Type the correct value for the “Workstation

description” field and press ENTER.

NOTE: If you have not configured TCP/IP, an error message is displayed. Fol-

low the on-screen instructions to continue.

6 Press ENTER to confirm your entries.

Contents

Main Page Table of Contents Chapter 1 Introduction Chapter 2 Setting Up the System Chapter 3 Remote Access Chapter 4 Backing Up & Restoring the System Chapter 5 Upgrading the Voice Messaging System Chapter 6 Setting Up TeLANophy Appendix A About the System Board Appendix B Starting and Shutting Down the System Appendix C Changing Network Protocols Page Introduction O About this guide Conventions BATTERY DISPOSAL CAUTION Related documentation Page Setting Up the System NEW WITH THIS P SETUP OVERVIEW Setup steps INSTALLING THE VOICE CONNECTING INTEGRATION O PROGRAMMING THE P Page Page Page Page Page Page Page SETTING UP THE VOICE MESSAGING SYSTEM S Page Page Page CHANGING THE KEYPAD MAP Page SIGNING IN AND S Remote Access REMOTE ACCESS Remote access software functions SETTING UP THE Page PREPARING AN SETTING UP A Page TIP: STARTING AND ENDING C Direct connection requirements Modem connection requirements TIP: USING THE OS/2 HOST CHANGING THE Page TRANSFERRING FILES TRACKING REMOTE SECTION 10 USING DIAL BACK SECTION 11 USING KEYBOARD Backing Up & Restoring the System USING THE BACKUP Setup steps for LAN backups and restores Setup steps for backups and restores with no LAN connection INSTALLING THE BRFT R INSTALLING NETWORK Page Page SETTING THE VOICE Windows connection with NetBIOS Automatic Windows log on NetWare connection Page SETTING UP A REMOTE WINDOWS COMPUTER Windows 98 or ME setup Windows NT or 2000 setup Page SCHEDULING SYSTEM TIP: Page Page June 2004 NEC Business Solutions Ltd TRANSFERRING BACKUP FILES TIP: Direct connection requirements Modem connection requirements Page RESTORING SYSTEM Page Page Upgrading the Voice Messaging System U PGRADE Upgrade steps ADDING SYSTEM Steps for adding a language Page INCREASING THE Steps for adding ports Page ADDING FEATURE Steps for adding feature packages Page SETTING UP ACTIONS Upgrading the Voice MessagingSystem Chapter 5 - 69 APPLICATION SCREEN PAGE 4 Page Setting Up T eLANophy TeLANophy setup steps CONFIGURING Setting Up TeLANophy Chapter 6 - 73 June 2004 Doc. No. 8557 - Release 1.1 SPECIFYING STATION NUMBERS FOR V APPLICATION SCREEN PAGE 1 Setup steps WORKSTATION HARDWARE AND SOFTWARE REQUIREMENTS SETTING UP TELANOPHY TCP/IP FOR WINDOWS 98 OR LATER TCP/IP FOR WINDOWS NT 4.0 TCP/IP FOR W SECTION 10 TESTING THE TCP/IP SECTION 11 Installing ViewFax SECTION 12 INSTALLING TELANOPHY FROM A CD SECTION 13 INSTALLING T SECTION 14 USING TELANOPHY WAN I SECTION 15 INSTALLING VIEWMAIL MESSAGING ON W Workstation requirements Installing ViewMail for Microsoft Messaging Page About the System Board ABOUT THE Page Page Page Starting and Shutting Down the System Appendix B STARTING AND Page Changing Network Protocols CHANGING NETWORK Changing network protocols Page Index