Xen IPK Xen Mail CTI Installation Guide
Setting Up TeLANophy Chapter 6 - 77
Doc. No. 8557 - Release 1.1
June 2004
SECTION 7
TCP/IP FOR WINDOWS 98 OR LATER
Perform the following procedure to set up Windows 98 or later workstations
that use TeLANophy applications with
TCP/IP.
To set up a Windows 98 or later workstation
1 From the Windows taskbar, choose “Start,” choose “Settings,” and then
choose “Control Panel.”
2 In the Control Panel, double-click “Network.”
3 In the Configuration tab, check whether
“TCP/IP protocol” is listed. Then choose the appropriate scenario:
If it is listed, choose “Cancel.”
If it is not listed, choose “Add,” then follow the on-screen instructions
to install the driver from your Windows.
Next Step:
OS/2 Warp documentation