NEC xen mail cti Setting Up T eLANophy

Xen IPK Xen Mail CTI Installation Guide Chapter 6 - 71
Doc. No. 8557 - Release 1.1 June 2004
Chapter 6 – Setting Up TeLANophy
Setting Up TeLANophy Chapter 6
SECTION 1
TELANOPHY
OVERVIEW
TeLANophy is a suite of applications thatcombines features of the voice
messaging software, the phone system, and a LAN. The TeLANophy suite
consists of ViewMail®, ViewFax®, ViewCall® Plus (with PhoneBASIC™), and
ViewMail for Microsoft Messaging. TeLANophy subscribers can use their
workstations to access and manage voice and fax messages. Perform the
following setup steps to use TeLANophy at your site.
TeLANophy setup steps
1 Activate TeLANophy and configure network protocols on the voice
messaging system:
• If you purchased TeLANophy as part of a new voice messaging system or
want to use a trial version, the TeLANophy feature package is automatically
activated the first time you set up the system. If you did not configure the
system’s network protocols at that time, see “Configuring network protocols
for TeLANophy” on page72. Otherwise, continue with step 2.
• If you are adding TeLANophy to an existing system, see “Adding feature
packages” to upgrade your system and configure network protocols to use
this feature.
2 Connect the voice messaging system to a LAN.
See “Connecting communications devices.”.
3 For ViewCall Plus, specify station numbers for ViewCall Plus on the voice
messaging system.
See “Specifying station numbers for VewCall Plus” on page 73.
4 Install and set up the TeLANophy application on individual workstations.
See “TeLANophy workstation overview” on page 74.