Xen IPK Xen Mail CTI Installation Guide Appendix B - 91
Doc. No. 8557 - Release 1.1
June 2004
Chapter B – Starting and Shutting Down the System
Starting and Shutting Down the System

Appendix B

SECTION 1

STARTING AND

SHUTTING DOWN
THE SYSTEM
Some procedures require that you shut down and restart the voice
messaging application. Others require that you shut down and restart both
the voice messaging application and the operating system. See the
following procedures to shut down the voice messaging application or the
application and the operating system.
Caution Do not disconnect the board or turn off the power while the
Application LED (Red) is on.
Caution Always shut down the voice messaging system before turning off
the phone system or subscribers may lose messages.
To shut down and restart the voice messaging system application
1 Shut down the voice messaging application by pressing ESC at the
Banner screen and then following the system prompts.
2 If you are connected to the voice messaging system using a monitor,
keyboard, and mouse, perform the following actions to restart the voice
messaging application. Otherwise, go to step 3.
• Go to the OS/2 desktop by pressing ALT+ESC repeatedly until it appears.
• Select the Restart Voicemail icon on the OS/2 desktop.
3 If you are using a remote access connection to access the voice
messaging system screens, perform the following actions to restart the
voice messaging application:
• Open an OS/2 command prompt as described in “Using the OS/2 host pro-
cess switcher” on page 34.
• A t the OS/2 command prompt, typee: and press ENTER.
• Type cd \vmail and press ENTER.
• Typevm and press ENTER.