June 2004 NEC Business Solutions Ltd
42 - Chapter 4 Backing Up & Restoring the System
Doc. No. 8557 - Release 1.1
June 2004
SECTION 2
INSTALLING THE BRFT
REMOTE
If the voice messaging system is not connected to a LAN, the support
computer can be used for backups.
To enable the BRFT utility, install the BRFT Remote on the support
computer that you use to establish remote access connections.
For Windows 95 computers, perform the procedure to the right.
Otherwise use the procedure below.
To install BRFT Remote
1 Insert the voice messaging system’s disc in the support computer's CD-
ROM drive.
2 If the support computer is running Windows, open a DOS window.
3 At the DOS command prompt, change to the computer’s CD-ROM drive.
4Type cd \packages\brftrmt to change to the BRFT subdirectory.
5Type install and press ENTER.
6 Follow the on-screen instructions to complete the installation.
NOTE: If you get an “Incorrect DOS” error message and the utility exits,
you are probably installing on a Windows 95 computer. Perform
the next procedure.
To install BRFT Remote for Windows 95
1 Insert the voice messaging system’s disc in the support computer's CD-
ROM drive.
2 If the support computer is running Windows, open a DOS window.
3 At the DOS command prompt, change to the computer’s CD-ROM drive.
4Type
cd \packages\brftrmt to change to the BRFT subdirectory.
5Type
set comspec=c:\windows\command.com and press ENTER.
6Type
install and press ENTER.
7 Follow the on-screen instructions to complete the installation.