June 2004 NEC Business Solutions Ltd
24 - Chapter 2 Setting Up the System
Doc. No. 8557 - Release 1.1
June 2004
SECTION 9
SIGNING IN AND
SIGNING OUT
Some of the procedures in this guide require that you sign in to the system
before you can change any system settings. Use the following procedures
to sign in and out of the system.
For security reasons, it is a good idea to change the sign-in ID which is the
personal ID for the system’s default system manager. After you change it,
make sure to tell the system manager what to enter for the system sign-in ID
when signing in to the system.
To sign in to the system
1 At the Banner screen, press F2.
2Type
nec and press ENTER.
3 If prompted, type your security code and press ENTER. (You can set a
security code by changing the Personal Options for the system manager
through the system conversation.)
To sign out of the system
1 Press ESC until you see the message “Are you sure you want to sign out
to the Banner screen?”
Type y to confirm that you want to sign out and return to the Banner screen.
To change the default sign-in ID
1 Go to the Personal Directory page for the system manager.
2 In the “Personal ID” field, type a new ID.