Nighthawk AC1900 Smart WiFi Router Model R7000
4.Select Internet.
Scroll to view more settings
5.In the Does your Internet connection require a login section of the screen, select the Yes radio button.
The screen adjusts.
6.In the Internet Service Provider list, select the encapsulation method PPPoE, PPPoA, or L2TP.
7.In the Login field, enter the login name your ISP gave you. This login name is often an email address.
8.In the Password field, type the password that you use to log in to your Internet service.
9.If your ISP requires a service name, type it in the Service Name (if Required) field.
10.In the Connection Mode
11.To change the number of minutes until the Internet login times, out, in the Idle Timeout (In minutes) field, type the number of minutes.
This is how long the router keeps the Internet connection active when no one on the network is using the Internet connection. A value of 0 (zero) means never log out.
12.In the Internet IP Address section, select one of the following radio buttons:
•Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses.
•Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects.
Specify Your Internet Settings
24
