![](/images/new-backgrounds/1146572/146572135x1.webp)
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
.
Figure
2.From the Object Type
•If you selected IP Address, enter an IP address or fully qualified domain name in the IP Address/Name field.
•If you selected IP Network, enter the IP network address in the Network Address field. Enter the mask length in the Mask Length
•Enter the Port Range or Port Number for the IP Address or IP Network you selected.
Note: Only default ports are allowed for Terminal Services, FTP and CIFS. An Administrator cannot configure user desired ports for these services.
3.Click Add Resource to add the IP address or IP network to the Network Resource. The new configuration appears in the Defined Resource Addresses table, as shown in the example below.
Setting Up User and Group Access Policies |