NETGEAR SSL312 manual Adding and Editing Global Policies

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual

Adding and Editing Global Policies

To define global access policies:

1.In the Global Policies section, click Add Policy. An Add Policy window displays.

Note: User and group access policies will take precedence over global policies.

Figure 4-3

2.From the Apply Policy To pull-down menu, select whether the policy will be applied to a predefined network resource, an individual host, a network, or all addresses.

3.In the Policy Name field, enter a name for the policy.

Note: SSL VPN Concentrator policies apply to the destination address(es) of the SSL VPN connection, not the source address. You cannot permit or block a specific

IP address on the Internet from authenticating to the SSL VPN Concentrator through the policy engine.

•If your policy applies to a predefined network resource, select the name of the resource from the Defined Resource menu. For information about creating network resources, refer to “Using Network Resource Objects to Simplify Policies” on page 4-20.

•If your policy applies to a specific host, enter the IP address of the local host machine in the IP Address field.

•If your policy applies to a network, enter the network address in the Network Address field and the subnet mask in the Subnet Mask field.

Setting Up User and Group Access Policies 4-5

v2.0, May 2007