NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
To prepare for installation:
1.Change the administrator account password.
a.On the left side of the browser window, select the Users and Groups link.
b.In the Users table, click on admin.
c.Type your new Password and
d.Click Apply.
2.Configure the DNS server IP address.
a.On the left side of the browser window, select the Network link.
b.In the Network menu, click the DNS Settings radio button.
c.Enter at least one DNS server IP address.
d.Click Apply.
3.Configure a default route for Internet access.
a.On the left side of the browser window, select the Network link.
b.In the Network menu, click the Static Routes radio button.
c.Specify the Default Gateway Address.
•If you plan a single arm topology, the Default Gateway is your corporate firewall. Specify that IP address for the
•If you plan a routing topology, the Default Gateway for the
d.Click Apply.
4.Change the Ethernet port IP Addresses.
a.Select the Network link.
b.In the Network menu, click the Interfaces radio button.
c.Enter your chosen Ethernet Port 1 IP Address and Subnet Mask.
d.If you plan a single arm topology, clear the Enable Routing Mode checkbox. If you plan a routing topology, check the Enable Routing Mode checkbox and enter your chosen Ethernet Port 2 IP Address and Subnet Mask.
e.Click Apply. If you changed the IP address for the Ethernet Port to which you are connected, you will now lose your connection to the SSL VPN Concentrator.
Installing the SSL312 |
