2-4 Administration Guide
not define the IP address information on your local LAN. You can define this information based on an IP configuration that may already be in place for the existing network. Alternatively, you can use the default IP address range used by the router.
Without Network Address Translation
If you are not using Network Address Translation, you will need to obtain all of the local LAN IP address information from your ISP.
If you are not using SmartIP (NAT), you should obtain:
■The number of Ethernet IP host addresses available with your account and the first usable IP host address in the address block
■The Ethernet IP address for your Netopia 4753
■The Ethernet IP subnet mask address for your Netopia 4753