Netopia 4753 manual Adding a circuit, Choosing Add Circuit displays the Add Circuit screen

WAN and System Configuration 9-7

Adding a circuit

Choosing Add Circuit displays the Add Circuit screen.

	Add Circuit
Circuit Name:	Circuit	3
Circuit Enabled:	+---------	+
	+---------	+
Traffic Type...	Voice
	Data
Circuit VPI (0-255):	+---------	+
Circuit VCI (0-65535):	0
Use Connection Profile...	Default Profile
Use Default Profile for Circuit
ADD Circuit NOW	CANCEL

The fields in the Add Circuit screen are the similar to the fields in the Change Circuit screen described above. You can add up to seven circuits (for a total of eight) and bind them to separate Connection Profiles.

■Use Connection Profile and Use Default Profile for Circuit allow you to choose the profile that you want to associate with that circuit. Choosing Use Connection Profile presents a pop-up menu that lists all of your enabled Connection Profiles. Choosing a profile from the list statically binds the circuit to the selected profile. Choosing Use Default Profile for Circuit statically binds the circuit to the Default Profile. When the circuit is bound to a Connection Profile, Use Connection Profile displays the name of the profile; when the circuit is associated with the Default Profile, Use Connection Profile displays Default Profile.

When more than one circuit is enabled, you must explicitly statically bind each circuit to the Connection Profile to be used on the circuit, or to the Default Profile. To do this you use Use Connection Profile or Use Default Profile for Circuit.