7-8 Administration Guide
IP Easy Setup
The IP Easy Setup screen is where you enter information about your Netopia Router’s:
■Ethernet IP address
■Ethernet Subnet mask
■Domain Name
■Domain Name Server IP address
■Default gateway IP address
Consult with your network administrator to obtain the information you will need. For more information about setting up IP, see “IP Setup” on page
IP Easy Setup |
|
Ethernet IP Address: | 192.168.1.1 |
Ethernet Subnet Mask: | 255.255.255.0 |
Domain Name: | isp.net |
Primary Domain Name Server: | 209.3.224.21 |
Secondary Domain Name Server: | 209.3.224.20 |
Default IP Gateway: | 127.0.0.2 |
IP Address Serving: | On |
Number of Client IP Addresses: | 100 |
1st Client Address: | 192.168.1.100 |
PREVIOUS SCREEN | NEXT SCREEN |
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
1.Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given you. This will be the Netopia Router’s IP address.
The Ethernet IP Address defaults to an address (192.168.1.1) within a range reserved by the Internet address administration authority for use within private networks.
Because this is a private network address, it should never be directly connected to the Internet. Using NAT for all your connection profiles will ensure this restriction. See “Multiple Network Address Translation” on page
2.Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet Subnet Mask defaults to a standard class mask derived from the class of the Ethernet IP address you entered in the previous step.
3.Press the Down arrow key until the editable field labeled Domain Name is highlighted.
4.Type the Domain Name your ISP gave you. Press Return. The next field Primary Domain Name Server will be highlighted.