10-2 Administration Guide
IP Setup
Main |
|
| System |
|
Menu |
|
| Configuration |
|
|
|
|
|
|
IP Setup
The IP Setup options screen is where you configure the Ethernet side of the Netopia 4753. The information you enter here controls how the router routes IP traffic.
Consult your network administrator or ISP to obtain the IP setup information (such as the Ethernet IP address, Ethernet subnet mask, default IP gateway, and Primary Domain Name Server IP address) you will need before changing any of the settings in this screen. Changes to these settings that you make in this screen will take effect only after the Netopia 4753 is reset.
To go to the IP Setup options screen, from the Main Menu, select System Configuration, then IP Setup.
The IP Setup screen appears.
IP Setup |
|
Ethernet IP Address: | 192.128.117.162 |
Ethernet Subnet Mask: | 255.255.255.0 |
Define Additional Subnets... |
|
Default IP Gateway: | 192.128.117.163 |
Backup IP Gateway: | 0.0.0.0 |
Primary Domain Name Server: | 0.0.0.0 |
Secondary Domain Name Server: | 0.0.0.0 |
Domain Name: | yourdomain.com |
Receive RIP... | Both |
Transmit RIP... | Off |
Static Routes... | IP Address Serving... |
Network Address Translation (NAT)... | Filter Sets... |
Set up the basic IP attributes of your Netopia in this screen.
Follow these steps to configure IP setup for your Netopia 4753:
■Select Ethernet IP Address and enter the IP address for the Netopia 4753’s Ethernet port.
■Select Ethernet Subnet Mask and enter the subnet mask for the Ethernet IP address that you entered in the last step.
■If you desire multiple subnets select Define Additional Subnets. If you select this item you will be taken to the IP Subnets screen. This screen allows you to define IP addresses and masks for additional subnets. See “IP subnets” on page
