![](/images/new-backgrounds/1264519/264519137x1.webp)
WAN and System Configuration
3.Select Data Link Encapsulation and press Return. The
4.If you chose any data link encapsulation method other than RFC1483 as your data link encapsulation method in the previous step, select Datalink Options and press Return. The Datalink Options screen appears.
Datalink (PPP/MP) Options
Data Compression... | Standard LZS |
Send Authentication... | PAP |
Send User Name: |
|
Send Password: |
|
Receive User Name: |
|
Receive Password: |
|
Maximum Packet Size: | 1500 |
In this Screen you will configure the PPP/MP specific connection params.
Select Data Compression and press Return. The
Select Send Authentication and press Return.
From the
■PAP is the most common, and requires you to enter a User Name and Password in the next two fields.
■CHAP requires you to enter a Host Name and Secret in the next two fields.
You can specify user name and password for both outgoing and incoming connections. the Send User Name/Password parameters are used to specify your identity when connecting to a remote location. The Receive User Name/Password parameters are used when receiving
5.You can edit the Maximum Packet Size field, if you want packets limited to a lower value than 1500. Return to the Add Connection Profile screen by pressing Escape.
6.Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.