Nikon LS-10E instruction manual Portrait orientation

[8]

[b)

'kG.

Fig. 4.7 Inserting film that is in a

portrait orientation into the scanner

Insertion du film en mode portrait

Elnlegen elnes Hochformatblldes In den Scanner

Portrait orientation

If the film is in a portrait orientation, determine the emulsion side of the film and insure that this side of the film faces towards the bottom of the scanner. Insert the slide into the scanner with the top of the image entering into the scanner first. This is shown in Figure 4.7.

[a]Image on film is in a portrait orientation

[b]Front panel film slot

[c]Film entered into the scanner narrow side first where the image on the film is in a portrait orientation

[d]Resultant image on monitor is oriented correctly

If the bottom of the image is entered first, the resultant scan will be upside-down . This can be corrected by the software after the scan with a vertical flip. This operation is fast and causes absolutely no image degradation.

58