Nortel Networks NN46225-300 manual Default Properties, Variable definitions Value

32Starting Device Manager

Default Properties

2Select the properties you want to change and set their values.

For information about the property fields, see "Variable definitions" (page 32).

3Click Ok.

	—End—
Variable definitions
Variable		Value
Status Interval		Interval at which statistics and status
		information are gathered (default is 20
		seconds).
Hotswap Detect every		The number of intervals at which
		Device Manager will check for module
		hot swaps.
Enable		If selected, Device Manager will poll the
		switch according to the settings listed
		above the Enable check box.
Retry Count		If Device Manager cannot transmit
		polling information at startup, the
		number of times Device Manager
		retransmits polling information.

Nortel Metro Ethernet Routing Switch 8600

Fundamentals — Using Device Manager

NN46225-300 02.02 Standard

4.21 October 2007

Copyright © 2005-2007, Nortel Networks