Using the menu bar 43
Menu bar
Menu bar descriptions
"Device Manager menu bar descriptions, Metro Ethernet Routing Switch 8600" (page 43) describes the menu bar fields for the Metro Ethernet Routing Switch 8600.
Device Manager menu bar descriptions, Metro Ethernet Routing Switch 8600
Menu | Description |
|
|
Device | The Device menu lets you open a device, refresh the device |
| view, and set polling and SNMP properties.This menu also |
| allows you to initiate a Telnet session, or open and view the |
| Trap Log, Sys Log, and Log. |
|
|
Edit | The Edit menu lets you view parameters for the chassis or for |
| selected objects. The object can be a card, fan, MDA, port, |
| power supply, or any other object. This menu also lets you run |
| diagnostic tests, configure Asynchronous Transfer Mode (ATM), |
| NTP, and SNMPv3 parameters, view the status of a controlled |
| software upgrade, and select all objects in the device. |
|
|
Graph | The Graph menu lets you view Device Manager statistics and |
| produce graphs of the chassis, WSM card, or port statistics. |
|
|
VLAN | The VLAN menu lets you view information about VLANs, |
| spanning tree groups (STG), MultiLink Trunking/Link |
| Aggregation Control Protocol (MLT/LACP), MAC Learning, |
| Split MultiLink Trunking (SMLT), stacked VLANs (SVLAN), and |
| Simple Loop Prevention Policy (SLPP). |
|
|
IP Routing | The IP Routing menu lets you set up IP routing functions for |
| the switch, including Open Shortest Path First (OSPF), Routing |
| Information Protocol (RIP), Border Gateway Protocol (BGP), |
| Virtual Redundancy Router Protocol (VRRP), Multicast, Internet |
| Group Membership Protocol (IGMP), Distance Vector Multicast |
| Routing Protocol (DVMRP), Protocol Independent Multicast |
| (PIM), Pragmatic General Multicast Protocol (PGM), DHCP, |
| Routed Split MultiLink Trunking (RSMLT), UDP forwarding, |
| filters, and policies. (See Note 1.) |
|
|
Nortel Metro Ethernet Routing Switch 8600
Fundamentals — Using Device Manager
4.21 October 2007
Copyright ©
