Nortel Networks NN46225-300 manual Setting the Device Manager properties

	Setting the Device Manager properties 33
Timeout		Length of each retry of each polling
		waiting period. When accessing the
		device through a slow link, you may
		want to increase the timeout interval
		and then change the Retransmission
		Strategy to superlinear.
Trace		If selected, you can perform trace
		routes.
Listen for Traps		If selected, Device Manager will listen
		for a trap.
		When you operate Device Manager
		from a UNIX platform, you must be
		logged in as root in order to receive
		traps.
		By default, traps are sent in SNMP
		V2c format. However, if you are using
		an older network management system
		(NMS) that supports only SNMP V1
		traps (HP OpenView), you can select
		that the traps be sent in V1 format.
		The management station operating with
		Device Manager is automatically added
		to the device trap receiver table.
Max Traps in Log		The maximum number of traps that can
		exist in the trap log. The default is 500.
Trap Port		The number of the port that trap
		messages are captured on. The default
		port for trap messages is 162.
Listen for Syslogs		If selected, Device Manager will listen
		for syslogs.
Confirm row deletion		If selected, Device Manager will send
		a message when a system table row
		is deleted.
Default Read Community		The default Read Community type.
		You can edit this field by highlighting
		the current value and typing over it.
Default Write Community		The default Write Community type. You
		can edit this field by highlighting the
		current value and typing over it.
Http Port		The default port used for web interface.
		This property cannot be changed for
		this dialog box.

Nortel Metro Ethernet Routing Switch 8600

Fundamentals — Using Device Manager

NN46225-300 02.02 Standard

4.21 October 2007

Copyright © 2005-2007, Nortel Networks