Nortel Networks NTRN10AN, 3500 manual Sdh, Alarm management

2-74Operation, administration, and maintenance (OAM) features

•Fully managed through Site Manager (does not support SNMP/ BCC as in the case of OPE circuit packs)

•Ethernet, WAN and Fibre Channel Operational Measurements (OMs) and Performance Monitoring (PMs)

•Supports auto-negotiation, flow control and jumbo frame (9600 bytes) on the Ethernet LAN port(s)

•Supports Small Form-factor Pluggable (SFP) optical interface offering 1000Base-SX(850 nm), 1000Base-LX (1310nm) and 1000Base-ZX (1550nm) reaches

The 2xGigE/FC-P2P circuit pack complies with the following industry standards and recommendations:

•ITU-T Draft New Recommendation G.7041, Generic Framing Procedure (GFP)

•ITU-T Draft Revised Recommendation G.707, Network node interface for

SDH

•ANSI X3.230-1994 Fibre Channel Physical and Signalling Interface (FC-PH) and for FC-0 (Physical) and FC-1 (Transmission protocol) layers

Note: 2xGigE/FC-P2P circuit pack does not adhere to the Fibre Channel Arbitrated Loop (FC-AL) standard and therefore does not support Fibre Channel Arbitrated Loop devices.

Alarm management

The following section describes new alarms specific to the 2xGigE/FC-P2P. For a detailed description of alarms and clearing procedures, refer to OPTera Metro 3500 Release 12.0 Alarm and Trouble Clearing NTPs (323-1059-543.1 and 323-1059-543.2).

OPTera Metro 3500 Multiservice Platform NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004