Nortel Networks 3500, NTRN10AN manual OMX shelf not required with OMX + Fiber Manager 4CH NTN449ZW

Hardware feature descriptions 3-103

The distinguishing features of the OMX + Fiber Manager 4CH are:

•Each OMX + Fiber Manager 4CH is a 1U high external drawer that contains optical filters, a small patch panel with bulkhead connectors, and fiber management components. The drawers can be mounted anywhere in a rack. Nortel Networks recommends that you install the trays directly beneath the shelf.

•Each OMX + Fiber Manager 4CH uses bulkhead connectors and patch cords to connect circuit packs.

OMX shelf (not required with OMX + Fiber Manager 4CH) (NTN449ZW)

The OMX shelf fits into a bay with four OPTera Metro 3500 shelves. OMX technology combines various wavelengths over a single optical fiber using a passive optical coupler.

An optical patch panel in the OMX shelf connects the optical fibers from the OC-192 or OC-48 DWDM circuit packs to OMX modules.

Note: The OPTera Metro OMX does not support OC-48 DWDM 1535.04 nm, OC-48 DWDM 1555.75 nm, OC-48 DWDM 1596.34 nm or OC-48 DWDM 1578.69 nm wavelengths.

The OMX modules multiplex optical signals together at the OC-192 or OC-48 line rate. Each OMX module has 12 faceplate interconnects. For details of the OMX shelf, see Figure 3-33.

Equipping rules

One OMX shelf can be mounted in an eight foot bay equipped with four OPTera Metro 3500 shelves. One OMX shelf supports two OMX modules, one working and one protection. See Table 3-3 on page 3-6for operational temperature ranges.

Planning and Ordering Guide—Part 1 of 2 NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004