Nortel Networks 3500, NTRN10AN manual Hardware feature descriptions

Hardware feature descriptions 3-99

If a 4x100BT, 4x100FX, 2x100BT-P2P or 2xGigE/FC-P2P circuit pack is inserted into an odd slot (nodd), then you can only insert one of the following circuit packs into the odd slot (nodd+1):

•2x100BT-P2P

•4x100BT

•4x100FX

•2xGigE/FC-P2P

If a 4x100BT, 4x100FX, 2x100BT-P2P or 2xGigE/FC-P2P circuit pack is

inserted into an even slot (neven), then you can only insert one of the following circuit packs into the odd slot (neven-1):

•2x100BT-P2P

•4x100BT

•4x100FX

•2xGigE/FC-P2P

Note: There is no equipment protection for 2xGigE/FC-P2P circuit packs.

The 2xGigE/FC-P2P circuit packs supports two SFP optic modules. Each SFP module is offered in either short reach (SX, NTTP51AA), long reach (LX, NTTP51BD) and extended reach (ZX, NTTP51DZ) range. A dust cap (A0512434) is required for any unequipped port.

Note 1: Support with VTX-series or STX-192 circuit packs in slots 13 and 14.

Note 2: The 2xGigE/FC-P2P circuit pack is shipped with two dust caps (A0512434).

See Table 3-3 on page 3-6for operational temperature ranges and operating distances.

Planning and Ordering Guide—Part 1 of 2 NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004