Nortel Networks NTRN10AN, 3500 Site Manager support, Preside Software Upgrade Management support

2-116Operation, administration, and maintenance (OAM) features

•TCA summary alarms will not clear if;

—the equipment or facility that a summary alarm is raised against is put out-of-service (OOS).

the equipment or facility that a summary alarm is raised against is removed without first deleting the equipment of facility.

Site Manager support

Site Manager Release 6.0.1 is used to operate, administer, maintain, and provision network elements at a nodal level. For more information, refer to the Site Manager Planning and Installation Guide, NTNM35FA.

Site Manager incorporates data applications, which manages OPE provisioning, and the TL1 Command Builder.

When you log in to Site Manager, the main window is displayed. See Figure 2-41 on page 2-117.

Preside Software Upgrade Management support

The purpose of Preside Software Upgrade Management (PSUM) is to deliver new software to the processors of one or more network elements (NE), and to upgrade the circuit pack cards on these network elements.

Preside SUM is a network-level application installed on the Preside Applications Platform. Preside SUM provides fast, simple, and reliable software upgrade deployment across a network, from a single location.

Preside SUM Release 3.0 supports the upgrade of OPTera Metro 3500 network elements controlled by a network processor (NP).

For more information on Preside Software Upgrade Management capability, refer Preside Software Upgrade Management Release 3.0 documentation (NTNM26DA).

OPTera Metro 3500 Multiservice Platform NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004