Using Enterprise Edge Voice Messaging 11
P0911621 Issue 02 Enterprise Edge 2.0 Voice Messaging Reference Guide
Enterprise Edge ATA 2
You cannot use a telephone attached to an Enterprise Edge ATA 2 for Enterprise
Edge Voice Messaging System Administration tasks.
There is no Message Waiting Notification if you are using a telephone connected to
an Enterprise Edge ATA 2.
To access Enterprise Edge Voice Messaging features such as Leave Message or
Open Mailbox, call the Enterprise Edge Voice Messaging extension and follow the
voice prompts. You can determine the Enterprise Edge Voice Messaging extension
by pressing ƒ·°fi from any Enterprise Edge telephone equipped
with a display.
You can also press:
•˚•·°⁄ to open your mailbox
or
•˚•·°‚ to leave a message and follow the voice prompts.
Entering characters on the Enterprise Edge dialpad
The buttons on your Enterprise Edge telephone dialpad act as both numbers and
letters. Each button represents a number and also represents letters of the alphabet.
You can enter a maximum of 16 characters on the command line of the Enterprise
Edge dialpad. The display shows up to16 characters. The prompt remains on the
display if you enter fewer than ten characters.
If you enter information where the prompt and the information is fewer than 16
characters, you can see both the prompt and the information you enter.
An example of a display with fewer than 16 characters, where the command line
prompt remains on the display is the Pswd command line prompt.
The prompt disappears for the following command line prompts:
•Name:
•Log:
•Dest ph:
Pswd:1111
OTHR RETRY OK