Transferring calls 59
P0911621 Issue 02 Enterprise Edge 2.0 Voice Messaging Reference Guide
Setting up Outbound Transfer to a phone number
To set up Outbound Transfer to a phone number for the first time:
Setting up Outbound Transfer to an extension
To set up Outbound Transfer to an extension for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press ° to open the Outbound Transfer (xfr) menu.
5. Press ADMIN or ⁄ to set up Outbound Transfer.
6. Enter the destination phone number and press OK or
£.
7. Press OK or £ to accept the destination number
(represented by the <x>). Press ADD or ¤ to add
special characters. For information, refer to Adding
special characters to the destination number on page
56. After you add special characters, press OK or £ to
accept the destination number.
8. Press CHNG or ⁄ to turn Outbound Transfer on.
9. Press QUIT or •.
10. Press ® to end this session.
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press ° to open the Outbound Transfer (xfr) menu.
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Outbound xfr
ADMIN SELECT
Ph:
RETRY OK
<x>
ADD OK
Transfer: off
CHNG QUIT
Transfer: on
CHNG QUIT
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT