Off-premise Message Notification 77
P0911621 Issue 02 Enterprise Edge 2.0 Voice Messaging Reference Guide
Adding an Off-premise Message Notification destination number
You can add another destination number if you have more than one destination
number. To add an Off-premise Message Notification destination:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press fl to open the Off-premise Message
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Notification.
6. Press OTHR to insert a new destination number in the
first Off-premise Message Notification position
(Notify 1), or press NEXT to view the destinations
until you find the destination position that you want to
replace, and then press OTHR.
Note: <x> represents the type of destination (phone,
extension or pager).
7. Press INS to insert a destination number.
Note: <x> represents the type of destination (phone,
extension or pager).
8. Press SETUP to set up a new destination number, and
follow the steps in Setting up Off-premise Message
Notification to a phone number on page 64
or
Setting up Off-premise Message Notification to an
extension on page 66
or
Setting up Off-premise Message Notification to a
pager number on page 68.
Note: When you are done adding destination
numbers, press ® to end the session.
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN SELECT
Notify 1:<x>
CHNG OTHR NEXT
Notify 1:<x>
DEL INS QUIT
Notify 1:none
SETUP NEXT