72 Off-premise Message Notification
Enterprise Edge 2.0 Voice Messaging Reference Guide P0911621 Issue 02
Changing the destination type from a pager to a telephone or extension
To change the Off-premise Message Notification destination from a pager to a
phone or extension (assuming that you have not entered a time range):
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press fl to open the Off-premise Message
Notification menu.
5. Press ADMIN or ⁄ to change Off-premise Message
Notification. The displays show a review of the first
destination type and destination number, followed by
the display in step 6.
6. Press CHNG or ⁄ to change the destination type and
the destination number.
7. Choose the type of destination number. Press PHONE or
⁄ to choose a phone number destination. Press EXT
or ¤ to choose an extension destination.
8. Press OK or £ to accept the destination number. Press
ADD or ¤ to add special characters if the destination
number is a phone. For information, refer to Adding
special characters to the destination number on page
56.
9. Press NEXT or £ to continue.
Note: <x> represents the type of destination
(telephone or extension).
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN SELECT
Notify: pager
CHNG NEXT
Destination:
PHONE EXT PAG ER
Notify:<x>
CHNG NEXT