Nortel Networks P0911621

22 Feature codes and mailbox options

Enterprise Edge 2.0 Voice Messaging Reference Guide P0911621 Issue 02

Note: If a caller who is leaving a message in a mailbox is interrupted, the part of

the message that is recorded before the interruption remains in the mailbox.

Delete this message. If Off-premise Message Notification is turned on, the

interrupted message causes Enterprise Edge Voice Messaging to call the

Off-premise Message Notification number immediately. For information on

Off-premise Message Notification, refer to About Off-premise Message

Notification on page 63.

Note: If Outbound Transfer is turned on, you cannot interrupt the call unless you

interrupt it before the caller transfers to your Outbound Transfer destination

number by pressing ‡. For information on Outbound Transfer, refer to

Outbound Transfer on page 56.

Programming a memory button with a feature code

Each Enterprise Edge Voice Messaging feature code can be programmed to a single

memory button.

To program a memory button:

Use one of the paper labels that come with your Enterprise Edge telephone to

identify the programmed button. To use the feature, press the labeled button.

1. Do not lift your handset. Press ƒ•‹.

2. The display shows Program Features.

3. Press a programmable button.

4. Press ƒ.

5. Enter the feature code number you want to program.

For example, enter ·°‚ to program the Leave

Message feature code. For a list of frequently used

feature codes, refer to the table Description of feature

codes on page 21.

The display shows that the button is programmed.

Repeat steps 1 through 5 for each Enterprise Edge

Voice Messaging feature code you want to program.

Program Features

Press a button

QUIT

Feature code:

QUIT

QUIT CLEAR

Programmed