64 Off-premise Message Notification
Enterprise Edge 2.0 Voice Messaging Reference Guide P0911621 Issue 02
Off-premise Message Notification parameters
You can set up the parameters for Off-premise Message Notification from any
touch tone phone. The parameters include:
• destination type (telephone, extension or pager)
• destination number (telephone, extension or pager)
• time range for receiving calls at phone numbers or extensions (Pagers are
notified any time there is a qualifying message.)
• types of message you want to receive (all new messages, or just messages
marked urgent)
Note: The restrictions that apply to your telephone line also apply to Off-premise
Message Notification numbers. For example, if you cannot dial long
distance phone numbers from your telephone, you cannot have a long
distance Off-premise Message Notification destination number.
Setting up Off-premise Message Notification to a phone number
When you set up Off-premise Message Notification, you can add special characters
to the destination phone number. Refer to:
•Adding special characters to the destination number on page 56
•Optimizing Outbound Transfer on page 58
To set up Off-premise Message Notification to one phone number for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press fl to open the Off-premise Message
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Notification.
6. Press PHONE or ⁄ to choose a phone number
destination.
7. Enter the destination phone number and press OK or
£. The destination phone number is a maximum of
30 digits.
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN SELECT
Destination:
PHONE EXT PAGER
Ph:
RETRY OK