Off-premise Message Notification 71
P0911621 Issue 02 Enterprise Edge 2.0 Voice Messaging Reference Guide
9. Press OK or £ to accept the destination number
(represented by <x>). Press ADD or ¤ to add special
characters if the destination number is a phone or
pager. For information, refer to Adding special
characters to the destination number on page 56. After
you add special characters, press OK or £ to accept
the destination number.
Note: If you chose a phone or extension destination,
go to step 11.
10. Press CHNG or ⁄ to change the destination and repeat
steps 7 to 9. Press NEXT or £ to continue.
Note: <x> represents the type of destination (phone,
extension or pager).
11. Press CHNG or ⁄ to change the start time. Press NEXT
or £ to accept the start time.
12. Press CHNG or ⁄ to change the stop time. Press NEXT
or £ to accept the stop time.
Note: Steps 13 and 14 let you review the start and
stop times.
13. Press CHNG or ⁄ to change the message type to
urgent. Press OK or £ to accept the new default
message. You can choose to be notified of all new
messages or urgent messages only. Change the
message type to urgent to be notified only when you
receive an urgent message.
14. Press ® to end the session.
Notify:<x>
CHNG NE XT
Start:<start time>
CHNG NEXT
Stop:<stop time>
CHNG NEXT
Msg type: new
CHNG OK
Msg notify
ADMIN SELECT