70 Off-premise Message Notification
Enterprise Edge 2.0 Voice Messaging Reference Guide P0911621 Issue 02
Changing Off-premise Message Notification
To change the parameters of Off-premise Message Notification refer to:
• Changing Off-premise Message Notification parameters
•Changing the destination type from a pager to a telephone or extension on page
72
•Changing the destination type from phone or extension to a pager on page 73
Changing Off-premise Message Notification parameters
To change the Off-premise Message Notification parameters from your Enterprise
Edge telephone (assuming that you have entered a time range):
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press fl to open the Off-premise Message
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Notification.
6. Press CHNG or ⁄ to change the destination.
Note: <x> represents the type of destination (phone,
extension or pager).
7. Press PHONE or ⁄ to choose a phone number
destination. Press EXT or ¤ to choose an extension
destination. Press PAGER or ‹ to choose a pager
number destination.
8. Enter the destination number and press OK or £. The
destination phone number cannot be longer than 30
digits.
Note: <x> represents the type of destination (phone,
extension or pager).
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN SELECT
Notify:<x>
CHNG NEXT
Destination:
PHONE EXT PAGER
<x>:
RETRY OK