60 Transferring calls
Enterprise Edge 2.0 Voice Messaging Reference Guide P0911621 Issue 02
Changing the Outbound Transfer parameters
To change the Outbound Transfer parameters:
5. Press ADMIN or ⁄ to set up Outbound Transfer.
6. Enter the destination extension and press OK or £.
7. Press OK or £ to accept the number.
The <x> represents the extension.
8. Press CHNG or ⁄ to turn Outbound Transfer on.
9. Press QUIT or •.
10. Press ® to end this session.
11. Press CHNG or ⁄.
Note: The <x> represents the current Outbound
Transfer destination number.
Outbound xfr
ADMIN SELECT
Ext:
RETRY OK
Accept:<x>
RETRY OK
Transfer: off
CHNG QUIT
Transfer: on
CHNG QUIT
<x>
CHNG NEXT