78 Off-premise Message Notification
Enterprise Edge 2.0 Voice Messaging Reference Guide P0911621 Issue 02
Turning Off-premise Message Notification on and off
You can turn Off-premise Message Notification on or off at any time. If you turn
Off-premise Message Notification off, you do not affect any of the assigned
parameters. For more information, refer to About Off-premise Message
Notification on page 63. If you turn Off-premise Message Notification on, you are
notified whenever you receive a message during the time you specify.
To turn Off-premise Message Notification on or off:
A person who receives an Off-Premise Message Notification call can cancel Off-
premise Message Notification to their destination number. This is useful if a
destination is incorrectly programmed and a wrong party receives the calls. The
recipient of an Off-premise Message Notification call hears the following voice
prompt: “Message for (name of mailbox owner). To log in press ⁄. If you have
received this call by mistake, please press ¤.
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
4. Press fl to open the Off-premise Message
Notification menu.
5. Press SELECT or ¤.
6. Press CHNG or ⁄ to turn Off-premise Message
Notification off if it is on (as shown).
7. Press OK or •.
Note: Press TIME to review the start and stop time
parameters.
8. Press ® to end the session.
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN SELECT
Notify on
CHNG TIME OK
Notify off
CHNG TIME OK
Mailbox admin
GREET PSWD QUIT