Off-premise Message Notification 75
P0911621 Issue 02 Enterprise Edge 2.0 Voice Messaging Reference Guide
12. Enter the time when Off-premise Message
Notification is to stop. This is a four digit field. Any
single-digit hour and minute must be preceded by a
zero.
13. Press AM or ⁄
or
PM or ¤.
14. Press OK or £ to accept the stop time.
15. Press NEXT or £.
16. Press NEXT or £ to continue. Press SETUP to add
another destination.
17. Press NEXT or £ to accept the start time that you
entered. Press CHNG or ⁄ to change the start time.
Note: Steps 18 and 19 let you review the start and
stop times.
18. Press NEXT or £ to accept the stop time that you
entered. Press CHNG or ⁄ to change the stop time.
19. You can choose to be notified of all new messages or
urgent messages only. Press OK or £ to accept the
default message type new. This means you are notified
whenever you receive a new message. Press CHNG or
⁄ to change the message type to urgent. If you
change the message type to urgent you are notified
only when you receive an urgent message.
20. Press ® to end the session.
Stop hhmm:
RETRY OK
<stop time>
RETRY AM PM
<stop time>
RETRY OK
Notify 2:pager
CHNG OTHR NEXT
Notify 3:none
SETUP NEXT
Start:<start time>
CHNG NEXT
Stop:<stop time>
CHNG NEXT
Msg type: new
CHNG OK
Msg notify
ADMIN SELECT