6.Maintenance and inspection
5.Insert the new batteries into upper and lower sections as far as they will go. ➀
●Replacement battery pack
For BU3002SW: Model number BP150XS (two required)
Run the top portion of the lower battery connector through the square hole in the plate cover. ➁ Insert the lug at the bottom of the cover into the hole in the main body and push it towards the main body. Use a screwdriver to securely tighten (clockwise) the 2 screws you removed.➂
Do not pinch the cable with the plate cover.
Tighten
the 2 screws.
1
3
2
1
6. Securely connect the upper and lower connectors. ➀ Secure the connector to the plate cover. ➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is stopped, but this sound is not abnormal.
Secure the connector by the 2 supports on the plate cover.
1
2
If you cannot secure the connector to the plate cover, the connector is not inserted completely.
Insert the connector again.
60
