Omron BU3002SW, BU1002SW specifications Cold start

4. UPS functions

Normal status				There is AC input		A	Turn ON the power switch while the beep stop/test switch is pressed.
	Power switch “OFF” (Status No. 2)					B	Turn OFF the power switch.
A	B					C Press and hold the beep stop/test switch (for more than 3 seconds).
Setting mode						D Press the beep stop/test switch (for less than 3 seconds).
	Cold start			OFF	Cold start OFF mode (Factory-shipped setting)
		C	*1
ON/OFF setting						D	D
		C		ON	Cold start ON mode
	D
Output voltage		C	*1	200V	Output 200V mode (Factory-shipped setting)
	setting
					D
		C		220V	Output 220V mode
					D
				230V	Output 230V mode			D
	D				D
				240V	Output 240V mode
Output voltage		C	*1
	setting				0 minute delay (Factory-shipped setting)
		C				D
					0.2 minute delay
						D
					0.5 minute delay
						D
D	D				1 minute delay		D
						D
					2 minute delay
						D
					10 minute delay
Signal input/output		C
	test			BL	Battery low signal output test (Factory-shipped setting)
		C				D
				TR	Trouble signal output test
						D
				BU	Backup signal output test
						D
				WB	Battery replacement signal output test				D
						D
				BS	Backup power supply stop signal output test
						D
				Remote	Remote ON/OFF signal output test

*1 Displays the current setting value.

50